This command can be executed from the SI Explorer's File menu > Process and Print/Publish > Sections tab.
This changes the 01 33 00 Submittal Procedures Section, making it unique to the Job by listing only the Submittal Descriptions (SD-01 through SD-11) actually used throughout the Job. This process focuses on the Definitions and Quantity of Submittals paragraphs. Submittals used in the Sections but not found in the Submittal Procedures Section will be listed on the Submittal Verification Report.
NEVER delete Submittals from the 01 33 00 Submittal Procedures Section. This will be done automatically when the Submittal Reconciliation option is selected.
The modifications are made to the Processed (.prn) files and not the Section (.sec) files. Each time a new Processed (.prn) file is generated, it overwrites the previous one. If the Submittal Procedure Section is not included in the job, the Submittal Reconciliation option will not be available.
To get correct results, you must select All Sections and Submittal Reconciliation when you print or process.
If Submittal Reconciliation is not selected, all of the Submittal Descriptions will be included in the 01 33 00 Submittal Procedures Section regardless if they are used or not.
Additional Learning Tools
Download the SpecsIntact QuickStart Guide from SpecsIntact Website's Support & Help Center page.
Watch the Submittal Verification Report eLearning module within Chapter 6 - Correcting QA Report Errors and Discrepancies.